There are lots of good reasons to buy a new watch strap. Changing your strap can give your trusty old Omega, Seiko or Timex a new lease on life. If you've recently acquired a new watch, you may want to store your OEM strap or bracelet to keep it in pristine condition. Even if you're not concerned with preserving the OEM strap, often they aren't the ideal quality, fit or design for your wrist comfort or personal style.
Shopping for and wearing new straps is one of the fun things about owning a watch. But before you get started, you'll need to know how to achieve the best fit for your watch case and wrist size. With watch straps, size matters, and we can help.
Find your perfect fit
You'll need at least two measurements to choose a strap that fits properly: the width and the length. If you plan to swap out the buckle for a new one or switch to a deployant clasp, you'll also need to know the strap/buckle taper measurement.
Strap width
The terms "strap size," "strap width" and "lug width" are often used interchangeably. Don't let this confuse you; they all mean the same thing. Basically, the width of the strap where it attaches to the watch lugs (the two projecting arms on the watch case) is the strap size.
To determine your strap size, try the easy way first: check the back of your current strap for an imprint that indicates the size.
If no useful information is provided on the strap, use a metric ruler or a caliper to measure the watch lug width, or the internal distance between the lugs. This measurement will be a whole number, expressed in millimeters (i.e., 20mm). If your lug width is 20mm, you need a 20mm strap.
Strap length
If your strap is too tight, it could irritate your skin and affect your circulation. Too loose, and your watch will migrate around your wrist, constantly straying from its desired location. You want to choose the correct length for your wrist size.
To determine your wrist size, measure your wrist in inches. Use a flexible tape measure or a strip of paper to wrap your wrist where your watch would naturally sit. Mark the point where the two ends meet. If you're using paper, measure it with a ruler. That number is your wrist size.
Compare your wrist size to each manufacturer's specifications in our product listings to make sure you're buying the right length. If you find yourself between two lengths, round up.
Strap/buckle taper
Most watch straps taper in width toward the buckle. Your buckle size matches the width at the buckle end of the strap, not the lug end. If you have a 22mm strap that tapers to 20mm at the buckle, you need a 20mm buckle. A 22mm buckle will be too big.
The strap/buckle taper is important information if you're swapping out the buckle with one of your own, or want to add a deployant clasp. Holben's includes this detail in all of our product listings.
Changing your watch strap
Consider investing in an inexpensive spring bar tool for strap changes. If your strap uses standard spring bars, a spring bar tool can save you a lot of frustration. It can also help with quick-release bars if you have larger fingers or are dealing with mobility issues like arthritis.
Cover your work area with a light-colored towel or cloth to protect your watch, keep tools and parts from rolling away and hopefully catch any spring bars that may fly into the air. Place your watch on the towel with the back facing up; this protects the front of the watch from accidental slips or scratches. You can also wrap the lugs (avoiding the holes) with masking or painter's tape.
Remove the old strap
Removing the old strap involves a few simple steps.
- Use the forked end of your spring bar tool to expose the shoulder of the spring bar between the strap and the lug, then push the shoulder of the bar away from the lug hole towards the strap.
- Extract the bar from the hole in the lug and remove that side of the strap.
- The opposite side of the strap should fall out of the lug hole on its own. If not, repeat the process on that side.
Sometimes the ends of the spring bars are exposed through holes in the lugs. If this is the case, simply use the pointed end of your spring bar tool to push in one end of the bar until it separates from the lug.
Install the new strap
Installing your new strap is similar to removing the old one, only in reverse.
- Make sure that both your watch and the strap are facing up, and that each strap piece is placed correctly; typically the buckle piece sits at the twelve o'clock position.
- Insert a spring bar into the channel in the strap end. Slip one end of the bar into the corresponding lug hole.
- Using your spring bar tool, depress the other side of the bar and guide it into the hole in the other lug. You should hear an audible "click" when the bar pops into place.
- Repeat the operation with the other strap piece.
Change the buckle
Changing the buckle works the same way as changing the strap, with a few other considerations.
- Use your spring bar tool to remove the spring bar connecting the old buckle to the strap.
- Place the prong of the new buckle (facing the same direction as the strap) in the slot on the strap.
- Insert the spring bar through the strap channel, taking care to catch the prong.
- Confirm that the prong is correctly positioned (sitting on top of the buckle, not underneath it), then insert the spring bar into the buckle holes.
Now all that's left to do is enjoy your new strap. If you have any questions, contact us and we would be happy to help.
HOW OTHERS ARE PAIRING IT
Customer Reviews
Holben's has been friendly and efficient over many orders, now. Very appreciated. As to the strap: the Fluco Record is my go-to classic mens strap, now. It's affordable, the leather is soft and strong, nicely grained, and superbly comfortable from the first wearing. I have a number of them , now, and the two photos are the most recent. Thank you, Holben's.
I haven’t worn this much yet since it’s still summer, but I’m pleased with the suppleness and construction.—especially for the money. It looks great with a champagne dial. Only wish it had quick release.
I am thrilled with my purchase—the strap is a wonderful fit for my piece, very comfortable, and elevates the style of my watch.
Had the watch band for a couple of weeks now. I'm going to say that this has been one of the best leather watch bands I've ever worn. Leather is well crafted, finishing is fantastic and it's soft so there's no need to "break in". Matched my brown band with a vintage blue dial Slava MIG-29 from the USSR. I would definitely be buying Fluco bands again for my other more expensive aviator watches.
Bought this to put on my grandads 40+ year old Seiko. It fits the covered lugs no problem. Soft but quality made like all Fluco straps.
Have been looking for a band for my OLD Seiko chronograph. Burgundy bands for gold/gold tone watches look really good, but the texture and shade of burgundy are critical. I've finally found an excellent band for the money. The dark burgundy and texture of this band is perfect for this watch. I've found that Fluco products have proven to be very good values. Happy with this purchase!!
One of the newly arrived batch of straps (Brown Buffalo-Grain) on a 1970 Shanghai SS1 movement 1524 model. Fluco is now my go-to for classic leather -- ultra comfortable right from the get-go.
These straps are is everything I want. They're flexible, comfortable, well built and classic. Makes it feel like this watch was made for me. I've already ordered more.
Purchased Record burgundy and Record brown buffalo-grain watch straps for my vintage 70’s Longines conquest wristwatch that was a Christmas gift from my Son. It is a perfect pairing for any vintage timepiece of this era. Quality is outstanding and it is very soft so no break in period is needed.
I’ve had the Fluco Record in different colors on other watches in the past and always liked them. While looking for a strap to accent the blued hands of my Seiko Presage, I went with the Record in blue - perfect alternative to the typical black alligator dress strap. Still dressy without looking formal thanks to the subtle texture and the color is right on. I always find the perfect strap at HFWB.
You might also like
Get everything you need
 | |
|---|---|
| Specifications | |
Brand |
Fluco
|
Width |
14mm, 16mm, 18mm, 20mm, and 22mm
|
Length |
Regular and Short
|
Thickness |
3.5mm or less
|
Color |
Black, Blue, Brown, Burgundy, Green, Grey, Red, and Tan
|
Stitching Color |
Black, Brown, Blue, Burgundy, Grey, Red, Tan, and Green
|
Material |
Calfskin
|
Pattern |
Buffalo Grain
|
Spring Bar |
Quick Release and Standard
|
Fits Apple Watch |
Yes
|