There are lots of good reasons to buy a new watch strap. Changing your strap can give your trusty old Omega, Seiko or Timex a new lease on life. If you've recently acquired a new watch, you may want to store your OEM strap or bracelet to keep it in pristine condition. Even if you're not concerned with preserving the OEM strap, often they aren't the ideal quality, fit or design for your wrist comfort or personal style.
Shopping for and wearing new straps is one of the fun things about owning a watch. But before you get started, you'll need to know how to achieve the best fit for your watch case and wrist size. With watch straps, size matters, and we can help.
Find your perfect fit
You'll need at least two measurements to choose a strap that fits properly: the width and the length. If you plan to swap out the buckle for a new one or switch to a deployant clasp, you'll also need to know the strap/buckle taper measurement.
Strap width
The terms "strap size," "strap width" and "lug width" are often used interchangeably. Don't let this confuse you; they all mean the same thing. Basically, the width of the strap where it attaches to the watch lugs (the two projecting arms on the watch case) is the strap size.
To determine your strap size, try the easy way first: check the back of your current strap for an imprint that indicates the size.
If no useful information is provided on the strap, use a metric ruler or a caliper to measure the watch lug width, or the internal distance between the lugs. This measurement will be a whole number, expressed in millimeters (i.e., 20mm). If your lug width is 20mm, you need a 20mm strap.
Strap length
If your strap is too tight, it could irritate your skin and affect your circulation. Too loose, and your watch will migrate around your wrist, constantly straying from its desired location. You want to choose the correct length for your wrist size.
To determine your wrist size, measure your wrist in inches. Use a flexible tape measure or a strip of paper to wrap your wrist where your watch would naturally sit. Mark the point where the two ends meet. If you're using paper, measure it with a ruler. That number is your wrist size.
Compare your wrist size to each manufacturer's specifications in our product listings to make sure you're buying the right length. If you find yourself between two lengths, round up.
Strap/buckle taper
Most watch straps taper in width toward the buckle. Your buckle size matches the width at the buckle end of the strap, not the lug end. If you have a 22mm strap that tapers to 20mm at the buckle, you need a 20mm buckle. A 22mm buckle will be too big.
The strap/buckle taper is important information if you're swapping out the buckle with one of your own, or want to add a deployant clasp. Holben's includes this detail in all of our product listings.
Changing your watch strap
Consider investing in an inexpensive spring bar tool for strap changes. If your strap uses standard spring bars, a spring bar tool can save you a lot of frustration. It can also help with quick-release bars if you have larger fingers or are dealing with mobility issues like arthritis.
Cover your work area with a light-colored towel or cloth to protect your watch, keep tools and parts from rolling away and hopefully catch any spring bars that may fly into the air. Place your watch on the towel with the back facing up; this protects the front of the watch from accidental slips or scratches. You can also wrap the lugs (avoiding the holes) with masking or painter's tape.
Remove the old strap
Removing the old strap involves a few simple steps.
- Use the forked end of your spring bar tool to expose the shoulder of the spring bar between the strap and the lug, then push the shoulder of the bar away from the lug hole towards the strap.
- Extract the bar from the hole in the lug and remove that side of the strap.
- The opposite side of the strap should fall out of the lug hole on its own. If not, repeat the process on that side.
Sometimes the ends of the spring bars are exposed through holes in the lugs. If this is the case, simply use the pointed end of your spring bar tool to push in one end of the bar until it separates from the lug.
Install the new strap
Installing your new strap is similar to removing the old one, only in reverse.
- Make sure that both your watch and the strap are facing up, and that each strap piece is placed correctly; typically the buckle piece sits at the twelve o'clock position.
- Insert a spring bar into the channel in the strap end. Slip one end of the bar into the corresponding lug hole.
- Using your spring bar tool, depress the other side of the bar and guide it into the hole in the other lug. You should hear an audible "click" when the bar pops into place.
- Repeat the operation with the other strap piece.
Change the buckle
Changing the buckle works the same way as changing the strap, with a few other considerations.
- Use your spring bar tool to remove the spring bar connecting the old buckle to the strap.
- Place the prong of the new buckle (facing the same direction as the strap) in the slot on the strap.
- Insert the spring bar through the strap channel, taking care to catch the prong.
- Confirm that the prong is correctly positioned (sitting on top of the buckle, not underneath it), then insert the spring bar into the buckle holes.
Now all that's left to do is enjoy your new strap. If you have any questions, contact us and we would be happy to help.
HOW OTHERS ARE PAIRING IT
Customer Reviews
This was my first time ever swapping strap on my own, and it ended up being easier than I thought it would. I achieved the look I was going for with my Seiko, and the cognac color makes the blue dial pop. I would say I have above average wrists in terms of size (watch face is 42mm), and I would be able to pull off a longer strap, which isn't an option with Fluco. Also, there is none of the Fluco branding or made in Germany that is in the stock photo, which would be nice to know.
This strap absolutely injected life into my Dan Henry chrono that was surprisingly difficult to find the perfect strap for. The leather is supple but not cheap feeling (unlike the stock strap that came with the watch). Feels and looks very premium. I appreciate the little things like the taper and the fact the keeper generally stays in place. Great strap, everything I was hoping for and then some. We'll see how it holds up over time but I would have no issue buying again as long as the craftsmanship doesn't fall apart egregiously (which I don't expect it will).
This strap looks great on my vintage Luminox field watch! Love the patina already forming, and the quality control is great. Happy with this :)
Great classic racing style watch band. Good quality leather strap, just the right color, and order shipped quickly. Perfect pairing with an Omega Speedmaster Date. Can't ask for much more at a reasonable price.
This strap, at 3mm thick, quickly moulds to the wrist comfortably. With 8 adjustment holes in the strap it's possible to get perfect fit, regardless of where it is worn on the wrist. The brown leather and natural color stitching form a nice vintage look, especially when worn with a field watch.
Real nice strap made from Horween vegetable tanned pull up leather from Chicago… Very refined strap that has some character, love the cognac color, beautiful… Strap tapers from 20mm to 16mm at buckle and 2.5MM thick the entire length… Solid comfortable leather… Another great strap from Holben’s… Some photos included, including one with the strap alongside a Di-Modell Rallye that I also purchased right here at Holben’s, where you can’t beat the service, quality and fasssst shipping…! Highly Recommend
This strap required no breaking in. It was soft and supple enough to wear right away comfortably. I love that it came in a short length so there is no excess strap visible at the top.
My only experience with Horween leather before this was the super shiny strap that came with my Nomos Tangente. This feels very different. It's got more of a matte finish and easily picks up a patina through regular wear. Feels much more rugged. Overall a great addition to my collection.
Fluco makes some of the nicest leather straps at any price. Can't wait to see how this Horween Dublin ages!
I have purchased this strap a few times from Holbens, in more than one colorway. As ever, great service and efficient shipping. This is a very versatile strap suitable for sport watches with mid sized cases, and the quality of the leather is apparent at first touch. Thank you again for another smooth transaction.
You might also like
Get everything you need
 | |
|---|---|
| Specifications | |
Brand |
Fluco
|
Width |
18mm, 19mm, and 20mm
|
Length |
Regular and Short
|
Thickness |
3.5mm or less
|
Color |
Brown and Tan
|
Stitching Color |
White
|
Material |
Calfskin
|
Pattern |
Distressed
|
Spring Bar |
Quick Release and Standard
|
Fits Apple Watch |
No
|