- Home
- Watch Band
- Hirsch Carbon Leather Quick Release Watch Strap
Hirsch Carbon Leather Quick Release Watch Strap
- Price
- $87.95
There are lots of good reasons to buy a new watch strap. Changing your strap can give your trusty old Omega, Seiko or Timex a new lease on life. If you've recently acquired a new watch, you may want to store your OEM strap or bracelet to keep it in pristine condition. Even if you're not concerned with preserving the OEM strap, often they aren't the ideal quality, fit or design for your wrist comfort or personal style.
Shopping for and wearing new straps is one of the fun things about owning a watch. But before you get started, you'll need to know how to achieve the best fit for your watch case and wrist size. With watch straps, size matters, and we can help.
Find your perfect fit
You'll need at least two measurements to choose a strap that fits properly: the width and the length. If you plan to swap out the buckle for a new one or switch to a deployant clasp, you'll also need to know the strap/buckle taper measurement.
Strap width
The terms "strap size," "strap width" and "lug width" are often used interchangeably. Don't let this confuse you; they all mean the same thing. Basically, the width of the strap where it attaches to the watch lugs (the two projecting arms on the watch case) is the strap size.
To determine your strap size, try the easy way first: check the back of your current strap for an imprint that indicates the size.
If no useful information is provided on the strap, use a metric ruler or a caliper to measure the watch lug width, or the internal distance between the lugs. This measurement will be a whole number, expressed in millimeters (i.e., 20mm). If your lug width is 20mm, you need a 20mm strap.
Strap length
If your strap is too tight, it could irritate your skin and affect your circulation. Too loose, and your watch will migrate around your wrist, constantly straying from its desired location. You want to choose the correct length for your wrist size.
To determine your wrist size, measure your wrist in inches. Use a flexible tape measure or a strip of paper to wrap your wrist where your watch would naturally sit. Mark the point where the two ends meet. If you're using paper, measure it with a ruler. That number is your wrist size.
Compare your wrist size to each manufacturer's specifications in our product listings to make sure you're buying the right length. If you find yourself between two lengths, round up.
Strap/buckle taper
Most watch straps taper in width toward the buckle. Your buckle size matches the width at the buckle end of the strap, not the lug end. If your 20mm strap tapers to 18mm at the buckle, you need an 18mm buckle. A 20mm buckle will be too big.
The strap/buckle taper is important information if you're swapping out the buckle with one of your own, or want to add a deployant clasp. Holben's includes this detail in all of our product listings.
Changing your watch strap
Consider investing in an inexpensive spring bar tool for strap changes. If your strap uses standard spring bars, a spring bar tool can save you a lot of frustration. It can also help with quick-release bars if you have larger fingers or are dealing with mobility issues like arthritis.
Cover your work area with a light-colored towel or cloth to protect your watch, keep tools and parts from rolling away and hopefully catch any spring bars that may fly into the air. Place your watch on the towel with the back facing up; this protects the front of the watch from accidental slips or scratches. You can also wrap the lugs (avoiding the holes) with masking or painter's tape.
Remove the old strap
Removing the old strap involves a few simple steps.
- Use the forked end of your spring bar tool to expose the shoulder of the spring bar between the strap and the lug, then push the shoulder of the bar away from the lug hole towards the strap.
- Extract the bar from the hole in the lug and remove that side of the strap.
- The opposite side of the strap should fall out of the lug hole on its own. If not, repeat the process on that side.
Sometimes the ends of the spring bars are exposed through holes in the lugs. If this is the case, simply use the pointed end of your spring bar tool to push in one end of the bar until it separates from the lug.
Install the new strap
Installing your new strap is similar to removing the old one, only in reverse.
- Make sure that both your watch and the strap are facing up, and that each strap piece is placed correctly; typically the buckle piece sits at the twelve o'clock position.
- Insert a spring bar into the channel in the strap end. Slip one end of the bar into the corresponding lug hole.
- Using your spring bar tool, depress the other side of the bar and guide it into the hole in the other lug. You should hear an audible "click" when the bar pops into place.
- Repeat the operation with the other strap piece.
Change the buckle
Changing the buckle works the same way as changing the strap, with a few other considerations.
- Use your spring bar tool to remove the spring bar connecting the old buckle to the strap.
- Place the prong of the new buckle (facing the same direction as the strap) in the slot on the strap.
- Insert the spring bar through the strap channel, taking care to catch the prong.
- Confirm that the prong is correctly positioned (sitting on top of the buckle, not underneath it), then insert the spring bar into the buckle holes.
Now all that's left to do is enjoy your new strap. If you have any questions, contact us and we would be happy to help.
Earn [points_amount] Holben's Rewards points
Headquartered in Klagenfurt, Austria, Hirsch was established in 1765 as a leather workshop and tannery. It remains a family-owned business to this day, and continues to gain recognition for excellence and innovation in watch strap design.
Scratch resistant, durable and resilient, sporty Carbon is constructed from a high tech, carbon fiber-embossed calf leather. Carbon is water resistant to 100m, thanks in part to Hirsch's rubberlike caoutchouc-style leather lining.
All of our Hirsch straps are integrated with handy quick-release spring bars. Prefer standard spring bars? Quick-release bars are easy to remove: simply slide the lever as far as you can to the left, then gently bend back the strap corner until the bar emerges from the slot.
Material:
- Carbon fiber-embossed calf leather.
- Rubberlike caoutchouc-style leather lining.
- Fitted with a Hirsch-branded polished stainless steel buckle.
Sizing:
- Available in 18mm, 20mm and 22mm.
- Strap/buckle taper: 18mm/18mm, 20mm/18mm, 22mm/20mm
- Piece length 120mm / 80mm excluding buckle.
- Total length 7-7/8" (200mm) excluding buckle.
- 6mm thick.
Includes:
- Integrated with stainless steel quick-release spring bars.
Watch an Urban Gentry video review of Hirsch's black Carbon leather strap on a Sinn 104 automatic:
HOW OTHERS ARE PAIRING IT
This looks great on my Speedmaster Day/Date. I just got it so I can’t comment about the durability. It looks even better than the photos.
This strap was purchased for my Glycine Combat Sub 46. The strap is comfortable, seems well made and hopefully lasts a long time. Holben’s also provided great customer service. They quickly responded to some emailed questions about sizing and a shipping issue. Thanks for a great strap and service!
I bought this to pair with my Bulova Moon Watch and wanted to have a "carbon fiber" textured strap to replace the OEM strap. The Hirsch Carbon Black Watch Strap fits the bill. I was very impressed when I got the strap. Its very well made, padded and comfortable. Well worth the investment. I'm very happy with my purchase and how it works with the watch. It will have a permanent home on this watch.
The look is a nice change of pace without overwhelming the look of the watch. Quite nice & worth the price.
Finest strap i have ever purchased absolute top quality and customer service
Purchased to go on Black dial watch with white numerals and markers.
Works perfectly, comfortable, looks amazing, a lot of compliments.
Bought this for my PO 2500 and it is a great addition to the OEM steel strap, adding a bit of character and versatility for a reasonable investment. Tool-less pins are great. Delivery was painless.
On initial acquisition the strap looks excellent and is very easy to swap in and out owing to the quick release spring bars built in. However after a bit of wear the "carbon" layer flakes off in small pieces onto your clothing, furniture, and workspace, accompanied by visible cracking on the strap eye holes revealing the rougher unfinished leather underneath.
A neat idea, but either I got a dud or it's a poorly executed design (either way I cannot recommend it for a daily use item).
Really nice product at a good price. Fast turn-around and delivery. The band looks great on my watch!
Beautiful Hirsch Band. Perfect for my Omega. Quick Shipping. Thanks